Gas Burners

Product Details:

These gas burners can be adapted to almost all purposes, where radiant heat is required. Industrial uses include brooding, curing, drying, food processing, Metal fabricating, fininshing, textile drying and weld preheating.

Specifications:

• Type: Infra-Red Burner
• Number of burner:1
• Gross wait: 2.3 kg

Additional Information:

• Production Capacity: 300 PIECES PER MONTH
• Delivery Time: 1 DAY
• Packaging Details: WOODEN PACKAGING

Product Details:

These are high heat output and flame spreading ring burners.

Specifications:

• Working Pressure: 0.5 kg/cm2, 4.5 psi
• Consumption per hour: 6.3 kgs, 14.0 lbs
• Rated Heat Output: 70560 kcal/hr, 280500 btu/h

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 DAY
• Packaging Details: WOODEN

Product Details:

These burners produce short turbulent oxidising flames ideal for high intensity weld pre-heating, whereever hydrogen cracking is to be avoided. It can also be used as an immersion heater or a space heater where secondary air is low.These can be made in longer lengths.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 DAY
• Packaging Details: WOODEN PACKAGING

Product Details:

Specifications:

• Fuel Type: Liquefied Gas
• Number of Burner: 1
• Material: Ignition: Auto ignition

Other Details:

• These high pressure burners are recommended for heating flat surface vessels. The produce sunflower shaped flame. Working pressure should not be varied by more than 0.07 kgf/cm (+1psig). Use of these burners at pressure higher than 0.42 kgf/cm (6 psig), will result in wastage of gas. At a pressure of 20 psig(1.40kgf /cm:), the gas consumption per hour will be double. The nomenclature M-22 and M-35 is derived from the gas consumption, which is 2.2 lb/hr for M. 22 and 3.5 lb/hr for M.3.5, while M stands for Marguerite. The burner rated heat outputs are valid for altitudes upto 2000 ft above sea level. If altitude is more than 2000 ft, rated heat outputs should be reduced 4 4% per extra 1000 ft altitude.

Additional Information:

• Production Capacity: 3000 PER MONTH
• Delivery Time: 1-3 DAUYS
• Packaging Details: WOODEN PACKAGING

Product Details:

Mini burner for buffet. This burner can be used by banquets for keeping the snacks warm while serving. This can also be used for keeping the food warm.

Product Details:

Specifications:

• Material: Cast Iron
• Net weight: 5.5 kg
• Size: 47.5x25.5x9 cm

Other Details:

• These high pressure burners are recommended for heating curved surface vessels as they produce powerful torch type flames. O Working pressure should not be varied by more than +0.07 kgf/cm² (+1 psig). Use of these burners at pressure higher than 0.42 kgf/cm² (6 psis) will result in sastage of gas. At a pressure of 20 psig. the gas consumption per hour will be double. O The nomenclature T-22 of T-35 is derived from the gas consumption rate which is 2.2 lb/hr for T-22 and 3.5 lb/hr for T-35, while T symbolizes torch. O The burner rated heat outputs are valid for altitudes upto 2000 ft above sea level. If altitude is more than 2000 ft, rated heat outputs should be reduced @4% per extra 1000 ft altitude.

Additional Information:

• Production Capacity: 5000 PCS PER MONTH
• Delivery Time: ONE DAY
• Packaging Details: WOODEN BOX PACKING

Product Details:

Specifications:

• Number of Burner: 1
• Material: Metal
• Net Weight: 6.5 kg

Other Details:

• These high pressure burners are recommended for heating flat surface vessels. The produce sunflower shaped flame. Working pressure should not be varied by more than 0.07 kgf/cm (+1psig). Use of these burners at pressure higher than 0.42 kgf/cm (6 psig), will result in wastage of gas. At a pressure of 20 psig(1.40kgf /cm), the gas consumption per hour will be double. The nomenclature M-22 and M-35 is derived from the gas consumption, which is 2.2 lb/hr for M. 22 and 3.5 lb/hr for M.3.5, while M stands for Marguerite. The burner rated heat outputs are valid for altitudes upto 2000 ft above sea level. If altitude is more than 2000 ft, rated heat outputs should be reduced 4 4% per extra 1000 ft altitude.

Additional Information:

• Item Code: HSN-8416
• Production Capacity: 5000 PCS PER MONTH
• Delivery Time: 1 DAY
• Packaging Details: WOODEN BOXES

Product Details:

Ideal heavy duty burners for bulk frying and general heating requirements of industries and pharmaceuticals, produce powerful torch type blue flames. These are available in four sizes.
These burner are recommended to be used at a pressure of 4.5 psi. These are available in four capacities. connection - 3/8" BSPTM.

Additional Information:

• Production Capacity: 5000 PER MONTH
• Delivery Time: 1 DAY
• Packaging Details: WOODEN CRATE PACKING

Product Details:

These burners produce long, reducing, low velocity flames for an excellent transfer efficiency in heating dies, mouldss, plates, casting and large fabricated components.

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: WOODEN PETI

Product Details:

These are used for puffing phulkas which are mainly used in hotels, banquets, outdoor catering. These are generally mounted on roti cum puffer bhatti.
Advantages-1) It does not leave black spots on roti which usually happens with cast iron puffer.2) It cuts the cost of RV burner that is mounted below in conventional puffer plate3) It gives nice look to bhatti.4) It is more durable and have long life.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 DAY
• Packaging Details: WOODEN PACKAGING

Product Details:

-These high pressure burners are recommended for surface where low heat is required at centre. They produce sunflower shaped flame.- These burners are used at pressure of 4.5 psi-Connection - 3/8"

Additional Information:

• Item Code: M-35
• Production Capacity: 500
• Delivery Time: 1 DAY
• Packaging Details: WOODEN PACKAGING

Product Details:

These burners are available in side loading and bottom loading. Both in two ribbons and single ribbon.

Specifications:

• Working Pressure: 0.3 kg/cm2, 4.5 psi
• Consumption per hour: 1.58 kgs, 3.5 lbs
• Rated Heat Output: 17650 kcal/hr, 70000 btu/hr

Additional Information:

• Production Capacity: 3000 PIECES PER MONTH
• Delivery Time: 1 DAY
• Packaging Details: WOODEN

Product Details:

-CAST IRON BURNERS FOR RESTAURANTS, HALWAI, HOTELS, RESORTS.
- Very good quality with high surface finish.- Good for export

Product Details:

Used in tandoors, jalebi burnerThese are available in all sizesThese burener are being widely used for cooking biryani. We have devepoped this product after many years of research work. Our product is highly heat effiecient.

Additional Information:

• Delivery Time: ONE DAY
• Packaging Details: CARTOON PACKING

Product Details:

RING BURNERS ARE GENERALLY USED IN APPLICATIONS WHERE HEAT OUTPUT REQUIREMENT IS VERY HIGH.

Product Details:

The Infrared burners we manufacture are mainly used in shawarma and barbecue machines, rotisseries & chicken roasters,
different applications of heating, drying, powder coating, paper and textile industries.
Specifications

It is a ceramic surface burner.

It is heavy duty and reliable.

Recommended gas pressure range is from 100 mbar to 1 bar.

Its surface temperature reaches up to 950 °C.

Competitively priced.

Mainly used on shawarma and donner kebab machines.

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: BOX PACKING

Product Details:

We manufacture all kind of cooking burners for hotels and restaurants of very high surface finish. We have expertise in this area from more than 50 years.

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 DAY
• Packaging Details: CRATE PACKING

Product Details:

-Use in poultry farms-For breeding of chicks- Gas is used as a medium

Product Details:

Specifications:

• These burners can be supplied in any ribbon length from 100 mm to 400 mm (4" to 16")
• Working Pressure: 0.35 kg/cm2, 4.5 psi
• Consumption per hour: 0.68 kgs, 1.5 lbs
• Rated Heat Output: 7560 kcal/hr, 30000 btu/hr

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: WOODEN PACKAGING

Product Details:

Small jet of gas that is kept burning in order to ignite gas burner.

Specifications:

• Working Pressure: 0.035 kg/cm2, 0.5 psi
• Consumption per hour: 0.043 kgs, 0.094 lbs
• Rated Heat Output: 480 kcal/hr, 1895 btu/hr

Additional Information:

• Production Capacity: 5000
• Delivery Time: 1
• Packaging Details: wooden

Product Details:

Product Description

We are engaged in supplying a wide assortment of Bottom Burner - Brass Knob. Manufactured keeping in mind the specifications, given by the customers, these products are available in several models and sizes as per the need of the customers.

Features:

• Bottom gas burner
• Black power coated
• Size - full
• Standard knob

Bottom Burners:

• These burners normally used with prefabricated stands.
• These burners are ideal for Caterers, Tent House and for open kitchen.

Additional Information:

• Production Capacity: 1000 PER DAY
• Delivery Time: 1 DAY
• Packaging Details: WOODEN PACKAGING

Product Details:

Cast iron jet burners typically used in tandoors for fast heating. Can be fuelled by either by propane or natural gas

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 DAY
• Packaging Details: BOX

Specifications:

• Material: Metal
• Fuel Type: Fuel Gas
• Color: Yellow

Additional Information:

• Minimum Order Quantity: 5 Unit